Connect eWeLink Smart Home to Wireless Tag and unlock powerful automations

This Trigger fires every time your eWeLink Button is pressed.

This Trigger fires when specified motion sensor tag(s) armed in motion detection mode, have moved.

This trigger fires when your eWeLink Support 4-Channel Plug is turned on or off.

This Trigger fires when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window is open.

This trigger fires when your eWeLink Support 3-Channel Plug is turned on or off.

This Trigger fires when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window is closed.

This trigger fires when your eWeLink 2-Channel Plug is turned on or off.

This Trigger fires when specified PIR KumoSensor detects movement.

This trigger fires when your eWeLink Support 1-Channel Plug is turned on or off.

This Trigger fires when specified PIR KumoSensor or regular motion sensor tag detects no movement for a time-out period.

This trigger fires when your eWeLink Support 4-Channel Switch is turned on or off.

This Trigger fires when a specified tag senses that its ambient temperature exceeds an upper threshold configured at temperature options screen inside the WirelessTag app.

This trigger fires when your eWeLink 3-Channel Switch is turned on or off.

This Trigger fires when a specified tag senses that its ambient temperature falls below an lower threshold configured at temperature options screen inside the WirelessTag app.

This trigger fires when your eWeLink Support 2-Channel Switch is turned on or off.

This Trigger fires when a specified tag senses that its ambient temperature returns between the upper and lower thresholds configured at temperature options screen inside the WirelessTag app.

This trigger fires when your eWeLink Support 1-Channel Switch is turned on or off.

This Trigger fires when a specified tag with humidity or moisture monitoring enabled, detects "too wet" state. Adjust the threshold from the humidity/moisture options screen inside the WirelessTag app.

This trigger fires when your eWeLink Support Smart Dimmer is turned on or off.

This Trigger fires when a specified tag with humidity or moisture monitoring enabled, detects "too dry" state. Adjust the threshold from the humidity/moisture options screen inside the WirelessTag app.

This trigger fires when the brightness of selected dimmer is above threshold.

This Trigger fires when a specified tag with humidity or moisture monitoring enabled, returns within normal humidity range. Adjust the upper/lower thresholds from the humidity/moisture options screen inside the WirelessTag app.

This trigger fires when the brightness of selected dimmer is below threshold.

This Trigger fires when specified water sensor tag detects water with its resistive sensor, or when you short circuit its tip.

This trigger fires when the state of selected door sensor is open or closed.

This trigger fires when specified water sensor tag transitions from detected water state to not detected water state, or when you open circuit its tip.

This trigger fires when the temperature of selected device goes above or below threshold.

This Trigger fires when a specified tag goes out of range. Note that the system can only determine whether a tag is out of range, if the "auto-update" is enabled.

This trigger fires when the humidity of selected device goes above or below threshold.

This Trigger fires when a specified tag comes out of "out of range" state. Only tags with auto-update is enabled can come out of "out of range" state.

This trigger fires when the voltage of selected device is above or below threshold.

This Trigger fires when the server detects that specified tag manager lost Internet connection due to power outage or Internet connection problems.

This trigger fires when the electric current of the selected device goes above or below threshold.

This Trigger fires when specified tag manager is back online.

This trigger fires when your light is turned on or off.

This Trigger fires every time a specific KumoApp produces a log message with KumoApp.Log call with a specific type.

This trigger fires when your light brightness goes above or below.

This Trigger fires every time a temperature/humidity/lux update is received from specified sensor/tag(s).

This trigger fires when the fan or the light of your FanLight is turned on or off

This Trigger fires when a specified tag senses that its ambient light exceeds an upper threshold configured at light options screen inside the WirelessTag app. For example, this can be used to detect fridge door open.

This trigger fires when an alarm of your RF Bridge is activated.

This Trigger fires when a specified tag senses that its ambient light exceeds an lower threshold configured at light options screen inside the WirelessTag app. For example, this can be used to turn on a light in a room.

This Trigger fires every time the camera detects a motion event.

This Trigger fires when a specified tag senses that its ambient light intensity returns between the upper and lower thresholds configured at light options screen inside the WirelessTag app.

This trigger fires when the water level of a diffuser is low.

This trigger fires when motion is detected or no motion is detected from Zigbee motion sensor.

This trigger fires when leak is detected from water leak sensor.

This trigger fires when the status of a Zigbee door sensor is open or closed.

This trigger fires when Zigbee Wireless Switch is pressed, double pressed, or long pressed.

This trigger fires when the selected electric curtain is open or closed.

This trigger fires when the child lock status changes (enabled/disabled).

This trigger fires when the thermostat mode changes.

This trigger fires when the thermostat turns on or off

This trigger fires when your light’s color temperature of light apperances warm or cool white.

This trigger fires when your lights to a specified colour .

This Trigger fires every time your eWeLink Scene Controller is pressed.

This query returns specified door/window sensor/tag's current state, including temperature, humidity/lux (when available) and motion state such as door open/close, moved, or detected motion (for PIR sensor)

This query returns the on/off state of the device you choose.

The query returns if the specified tag manager is online or offline, as well as how many hours it has been online.

This query returns a list of when the specified tag sensed that its ambient temperature had returned between the upper and lower thresholds configured on the temperature options screen inside the WirelessTag app. Note: this query will only return future e

This query returns a list of when the server detects that specified tag manager lost Internet connection due to power outage or Internet connection problems.

This query returns a list of when a specified tag sensed that its ambient temperature fell below a threshold. Note: this query will only return future events after this Applet is created.

This query returns a list of times when a specified tag senses that its ambient temperature exceeded an upper threshold configured at temperature options screen inside the WirelessTag app. Note: this query will only return future events after this Applet

This query returns a list of when a specified tag with humidity or moisture monitoring enabled, detects "too wet" state.

This query returns a list of when the specified tag manager was back online.

This query returns a list of when specified water sensor tag transitions from detected water state to not detected water state, or when you open circuit its tip.

This query returns a list of when specified motion sensor tag(s) armed in motion detection mode, have moved.

This query returns a list of when a specified tag goes out of range. Note that the system can only determine whether a tag was out of range, if the "auto-update" was enabled.

This query returns a list of when specified PIR KumoSensor or regular motion sensor tag detects no movement for a time-out period.

This query returns a list of when a temperature/humidity/lux update was received from specified sensor/tag(s).

This query returns a list of when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window was open.

This query returns a list of when a specified tag senses that its ambient light exceeds an upper threshold configured at light options screen inside the WirelessTag app. Note: this query will only return future events after this Applet is created.

This query returns a list of when a specified motion sensor tag(s) or reed sensor(s) detect that a door or window was closed.

This query returns a list of every time a specific KumoApp produces a log message with KumoApp.Log call with a specific type.

This action will turn your eWeLink Support 4-Channel Plug on or off.

This Action will beep the tag. NOTE: Only compatible with the Motion Sensor Tags with buzzer.

This action will turn your eWeLink Support 3-Channel Plug on or off.

This Action will stop the tag beeping. This action can also be used to test tag connectivity.

This action will turn your eWeLink 2-Channel Plug on or off.

This Action will turn on LED on the tag or a WeMo device.

This action will turn your eWeLink Support 1-Channel Plug on or off.

This Action will turn off LED on the tag or a WeMo device.

This action will turn your eWeLink 4-Channel Switch on or off.

This Action arms motion sensor on a tag. Regular angle based motion sensor, Reed KumoSensor and PIR KumoSensor can all be armed using this action.

This action will turn your eWeLink Support 3-Channel Switch on or off.

This Action disarms motion sensor on a tag. Regular angle based motion sensor, Reed KumoSensor and PIR KumoSensor can all be disarmed using this action.

This action will turn your eWeLink Support 2-Channel Switch on or off.

This Action will enable temperature monitoring on a tag.

This action will turn your eWeLink Support 1-Channel Switch on or off.

This Action will disable temperature monitoring on a tag.

This action will turn your eWeLink Support smart dimmer on or off.

This Action will enable humidity or moisture monitoring on a tag. NOTE: Only compatible with Tags with humidity or moisture sensor.

This action will set brightness for selected eWeLink Support smart dimmer .

This Action will disable humidity or moisture monitoring on a tag.

This action will set a color for selected light.

This Action will start a KumoApp installed under the current user account. If the KumoApp is running, nothing will happen. If a KumoApp does not register any event handler or timer, it will automatically stop after executing the first time, allowing this action to run multiple times without user intervention.

This action will set a color temperature for selected light.

This Action will stop a KumoApp. If the KumoApp is not running, nothing will happen.

This action will set the brightness for selected light .

This Action will enable brightness/ambient light intensity monitoring on a tag. NOTE: Only compatible with Tags with ambient light sensor.

This action will turn your light on or off.

This Action will disable brightness/ambient light intensity monitoring on a tag.

This action will press selected remote button on your RF Bridge.

This action will force an update to read the current temperature, humidity and ambient light (when available).

This action will turn on or turn off the fan or the light of your fanlight.

This action will open or close your electric curtain.

This action will turn your diffuser on or off.

This action will open selected curtain to the percentage you set.

This action will enable or disable the child lock.

This action will change the thermostat mode (Manual/Program).

This action will turn your eWeLink Thermostat on or off.

This action will set the light on/off or the fan speed of fanlight.

This Action will makes the camera sound an alarm.